Mr. Joe chan 0 Report post Posted January 13, 2016 Hi, I am new to this projects but love the potential of it. See the attached document for a sample project that I am playing with. Somehow, if surface filleting is in place, there would be holes on the cylinder end surface depend on parameters. What might be the cause and how to make it work? Thanks.ErrorSample.fdbc Share this post Link to post Share on other sites
Stefan Wunderlich 6 Report post Posted January 15, 2016 Hi Joe, You did a nice Project here, thanks for sharing. The Problem I see are the coplanar faces that make the boolean operation difficult and may lead to problems.You can see the warning sign after the boolean operation which may lead to problems with further operations. In this project it is easy to fix: just shorten the cylinder (what I did) or extend the teeth to avoid coplanarity where possible. I attached the modified project. Keep on the good work. Cheers,Stefan ErrorSample.fdbc Share this post Link to post Share on other sites
Mr. Joe chan 0 Report post Posted January 15, 2016 Hi Stefan, Thanks for looking into this. Unfortunately, the provided solution doesn't work. In your modified project file, if you change pm_N to 10, the holes and warnings will show up again. I have noticed some parameters working fine but not all. And the problem happens only when filleting is enabled. It should be after boollean operation has completed. -Joe Share this post Link to post Share on other sites
Stefan Wunderlich 6 Report post Posted January 18, 2016 Hi Joe, I have to appologize - I am working with the not yet released 4.0.4. There are some changes concerning triangulation and boolean operations and furtunatley it seems to fix the problems with this project. We will release 4.0.4 within this week (you will receive an update notification) so I hope this problem will be solved then. If not, please keep me informed. Cheers,Stefan Share this post Link to post Share on other sites
Mr. Joe chan 0 Report post Posted January 18, 2016 Glad to hear that! I'm looking forward to testing the new release. Thanks, Joe Share this post Link to post Share on other sites
Mr. Joe chan 0 Report post Posted January 27, 2016 Is there any update about the new release? I saw some other triangulation related issues and like to try the new release. Thanks. Share this post Link to post Share on other sites
Karsten Wenzke 12 Report post Posted January 28, 2016 Hey Joe, Unfortunately there is not update. Would be great if you can attach the project and explain the issues then I can take a look at it.You could also create a new thread in the bugs section then only our team and you can see the post. Cheers, Karsten Share this post Link to post Share on other sites
Mr. Joe chan 0 Report post Posted January 28, 2016 Project file is already posted on the top. Share this post Link to post Share on other sites
Karsten Wenzke 12 Report post Posted January 28, 2016 Hey, Thanks I thought you have a new project because you wrote "other triangulation issues".Therefore I thought you had something new to share. Cheers, Karsten Share this post Link to post Share on other sites
Mr. Joe chan 0 Report post Posted January 28, 2016 They are similar to the one I originally reported. I just like to see if the 4.0.4 can fix them all. Share this post Link to post Share on other sites