Mr. Carlos Repolho 1 Report post Posted September 23, 2015 Good Morning, Could you give some hints regarding the configuration skybackground menu or provide some kind of video tutorial. If a tuturial is not available could you give a short explanation how to positionate the water regarding the ship, my ship appears always to be at the top of the water even after i define the ship position vector. best regards, thank you Share this post Link to post Share on other sites
Matthias Maasch 21 Report post Posted September 23, 2015 Hi Carlos, please find attached a sample project. I usually create an image of the hull and shift it in negative z by the draft value. Thus it is in the water. I don't know how to change the sky-view water level. I hope it helps. Cheers MatthiasbasicOSV_skyView.fdb 1 Share this post Link to post Share on other sites
Mr. Carlos Repolho 1 Report post Posted September 23, 2015 Hi Carlos, please find attached a sample project. I usually create an image of the hull and shift it in negative z by the draft value. Thus it is in the water. I don't know how to change the sky-view water level. I hope it helps. Cheers MatthiasThanks i will give it a look. I achelly thought about it but i have the container stack and the bridge dont know if i can shift it also. best regards Share this post Link to post Share on other sites
Mr. Carlos Repolho 1 Report post Posted September 23, 2015 I worked perfecly thanks a lot! :) Now i would like to take a snapshot but the pic comes purple. Any solution? Share this post Link to post Share on other sites
Matthias Maasch 21 Report post Posted September 24, 2015 Hi Carlos, you're right, the in-build screenshot tool seems to have problems with the Skyview. Let me check that! The only solution right now is probably using an external tool. Windows Snipping Tool or >print< and good old Windows Paint :) I'll keep you up to date. Cheers Matthias Share this post Link to post Share on other sites