cui 0 Report post Posted April 12 I'm trying to model a fish-like shape, and when I merge the body part with the tail in a boolean operation, he always fails, please tell me why this happens and exactly how to solve it, thank you all! Share this post Link to post Share on other sites
Ceyhan Erdem 14 Report post Posted April 12 Hi Cui, Looks like you are using Caeses v4. Is there a specific reason for not to upgrade to Caeses v5? The reason should be due to some errors on one of your BReps. I believe you have obtained the Body geometry by revolving a profile, which may lead to some problems. Can you please trim the end profile a bit and then use "Close Planar Holes" operation, well not sure if it exists in Caeses v4, or use some other way so that it is not that pointed anymore. Cheers Ceyhan Share this post Link to post Share on other sites
cui 0 Report post Posted April 12 Thank you very much for your reply. I tried what you mentioned and it still doesn't work. I also tried boolean with the cylinder and the body/tail separately, but they all reported an error, much to my annoyance.. Share this post Link to post Share on other sites
cui 0 Report post Posted April 12 Also, if you upgrade to version 5, will it cause the previously stored .fbdc files to not be opened for operation. This has happened when my friend operated it. Share this post Link to post Share on other sites
Ceyhan Erdem 14 Report post Posted April 15 Hi Cui, I was referring to trim the pointy tip which seems to be still there. I will suggest you to move to Caeses v5. You may have some errors which can be worked to make it compatible with v5. Cheers Ceyhan Share this post Link to post Share on other sites
