Toggle All for script

[Toggle All for script]

Hello Techie 

I am running a Dakota RSM based optimization. First I have imported some runs data. Now the problem is, when I am running it in batch mode it is not taking the imported results although in GUI mode, it is able to run the dakota optimization by toggling all. What acommand I should add so that it start taking the imported results while running optimization.

 

 

// [0.1, 30]
|Angle.setValue(20)
// [1, 10]
|Corner_Fillet.setValue(10)
// [11, 16]
|cross_Section_radius.setValue(16)

// ---------------------------------------------------------------
// DESIGN VARIABLES END
// ---------------------------------------------------------------

// ---------------------------------------------------------------
// EXPORTS
// ---------------------------------------------------------------

// export file name of |Export : hut.stl
//|Export.export()

// ---------------------------------------------------------------
// EXPORTS END
// ---------------------------------------------------------------

dakota1.run()

saveProject()

exit(true)

 

Regards

Yuvraj 

 

 

 

 

[Batch Mode Runs]

Hello Carl

Thankyou for the help. I am trying to deploy this on a cluster. It is much need to to create FSC file. I am currently using software Connector.

Regards

Yuvraj 

[Batch Mode Runs]

Hello CAESES

I am trying to run a optimization module through the batch mode but not able to get specific keywords in the script file. Please guide me how to get specific keywords to run a sobol project in batch mode. It just export one single stl file which I mentioned but doesnt run the sobol.

Thankyou

 

trial.fsc

[CAESES Launch problem in Ubuntu]

Hello Seb

 

This didnt work for me but what worked for me is putting this line "export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libstdc++.so.6" line in ./Bashrc.

Now CAESES is working fine.But window aligment is pretty messed up.

I have tried majorly everything.  I am running this in ubuntu 22.04(WSL2)

I cant maximise the window, I am pointing cursor at one particular point and it is getting somewhere else.

Please help regarding this.

 

Regards

Yuvraj

[CASES+OpenFoam]

Hello Andreas

 

Thankyou very  much for the help but now I have switched to linux where it is far more easier to these simulations and run them.

Although I will try this coupling again in Windows.

Best Regards

Yuvraj 

 

 

[CASES+OpenFoam]

Hello

 

I am just trying to test "PitzDaily" case of openFoam in CAESES but it not showing any result but at the same time I am running those cases in local termial, it shows result.

 

I have tried to capture the blockMesh but nothing is captured in file.

 

Please help me regarding this.

 

Regards

 

output.txtAllrunstdouterroroutput.redirect

pitzDaily.zip

[CAESES Launch problem in Ubuntu]

Hello Seb

Here is the output file for which you can have a look.

Regards

Yuvraj 

output.txt

[CAESES Launch problem in Ubuntu]

Hello Everybody

After installing CAESES, I run this command ./CAESES -style plastique but it is giving me this error. Can somebody please  help me in sorting it out 

 

 

yuvraj@LAPTOP-4J9EAJGS:~/CAESES_5.2.6_Linux.x86_64$ ./CAESES -style plastique
If you have crashes using a custom file dialog (PDF generation or OpenProject) add "-style plastique" to your start script
libGL error: MESA-LOADER: failed to open swrast: /usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/x86_64-linux-gnu/dri:\$${ORIGIN}/dri:/usr/lib/dri, suffix _dri)
libGL error: failed to load driver: swrast
QApplication: invalid style override 'plastique' passed, ignoring it.
        Available styles: Windows, Fusion
WebEngineContext used before QtWebEngine::initialize() or OpenGL context creation failed.
QGLXContext: Failed to create dummy context
Qt WebEngine resources not found at /home/yuvraj/CAESES_5.2.6_Linux.x86_64/resources. Trying parent directory...
Qt WebEngine resources not found at /home/yuvraj/CAESES_5.2.6_Linux.x86_64. Trying application directory...
Installed Qt WebEngine locales directory not found at location /home/yuvraj/CAESES_5.2.6_Linux.x86_64/translations/qtwebengine_locales. Trying application directory...
Qt WebEngine locales directory not found at location /home/yuvraj/CAESES_5.2.6_Linux.x86_64/bin/Linux.x86_64/libexec/qtwebengine_locales. Trying fallback directory... Translations MAY NOT not be correct.
Path override failed for key ui::DIR_LOCALES and path '/home/yuvraj/.QtWebEngineProcess'
[0124/115726.241167:WARNING:resource_bundle_qt.cpp(115)] locale_file_path.empty() for locale
Qt WebEngine resources not found at /home/yuvraj/CAESES_5.2.6_Linux.x86_64/resources. Trying parent directory...
Qt WebEngine resources not found at /home/yuvraj/CAESES_5.2.6_Linux.x86_64. Trying application directory...
Installed Qt WebEngine locales directory not found at location /home/yuvraj/CAESES_5.2.6_Linux.x86_64/translations/qtwebengine_locales. Trying application directory...
Qt WebEngine locales directory not found at location /home/yuvraj/CAESES_5.2.6_Linux.x86_64/bin/Linux.x86_64/libexec/qtwebengine_locales. Trying fallback directory... Translations MAY NOT not be correct.
Path override failed for key ui::DIR_LOCALES and path '/home/yuvraj/.QtWebEngineProcess'
[0124/115726.242784:WARNING:resource_bundle_qt.cpp(115)] locale_file_path.empty() for locale
Couldn't find UDisks. Is UDisks running?
Couldn't find UDisks. Is UDisks2 running?
Couldn't find UDisks. Is UDisks running?
Couldn't find UDisks. Is UDisks2 running?
Couldn't find UDisks. Is UDisks running?
Couldn't find UDisks. Is UDisks2 running?
CAESES 5.2.6

loading plugin libraries ...
plugbase - ok
plugblade - ok
plugdakota - ok
plugfeature - ok
pluggenericintegration - ok
plugkspline - ok
plugmeta - ok
plugnax - ok
plugopt - ok
plugoptmo - ok
plugsshrm - ok
plugxffl - ok
shfctrl - ok

initializing types ...
        plugins - ok
        basic object types - ok
        entity types - ok
        view types - ok

initializing commands ...
        all *** INFO DOCUSERVER : started [port: 34105]
Qt WebEngine resources not found at /home/yuvraj/CAESES_5.2.6_Linux.x86_64/resources. Trying parent directory...
Qt WebEngine resources not found at /home/yuvraj/CAESES_5.2.6_Linux.x86_64. Trying application directory...
Installed Qt WebEngine locales directory not found at location /home/yuvraj/CAESES_5.2.6_Linux.x86_64/translations/qtwebengine_locales. Trying application directory...
Qt WebEngine locales directory not found at location /home/yuvraj/CAESES_5.2.6_Linux.x86_64/bin/Linux.x86_64/libexec/qtwebengine_locales. Trying fallback directory... Translations MAY NOT not be correct.
Path override failed for key ui::DIR_LOCALES and path '/home/yuvraj/.QtWebEngineProcess'
[0124/115733.930262:WARNING:resource_bundle_qt.cpp(115)] locale_file_path.empty() for locale
 - ok

initializing configuration ...
*** INFO REPORTSERVER : started [port: 12345]

updating geometry - ok
QImage::scaleWidth: Image is a null image
QOpenGLWidget: Failed to create context
QOpenGLWidget: Failed to create context
QOpenGLWidget: Failed to create context
QOpenGLWidget: Failed to create context
QOpenGLWidget: Failed to create context
QOpenGLWidget: Failed to create context
Failed to create OpenGL context for format QSurfaceFormat(version 2.0, options QFlags<QSurfaceFormat::FormatOption>(), depthBufferSize 24, redBufferSize -1, greenBufferSize -1, blueBufferSize -1, alphaBufferSize -1, stencilBufferSize 8, samples 0, swapBehavior QSurfaceFormat::DefaultSwapBehavior, swapInterval 1, colorSpace QSurfaceFormat::DefaultColorSpace, profile  QSurfaceFormat::NoProfile)
./CAESES: line 118: 64555 Aborted                 ${FS_INSTALL_DIR}/bin/Linux.x86_64/CAESES $ARGS "$@"