Stanley Gabriel
-
Content Count
6 -
Joined
-
Last visited
Posts posted by Stanley Gabriel
-
-
Hi Heinrich,
Is it possible to change the origin to a different point once the section is defined.
-
Hi,
I have a foil section defined by 6 variables. I now have a feature that gives me equidistant points on the profile, however, I need to sample by design variables and get atleast 3500 different geometries, and run the feature on each of them. Is there a way I can do it from Command Line or an external C++/Java. Also there's an additional check that needs to be done based on the thickness of the profile at a certain position. Could we connect externally as the geometry is confidential. Is there a mail I can send it to instead.
-
For example take a NACA4Ds, how do I get the x and y coordinates equidistant on the profile, or if there's any tutorial that you would like me to do, please let me know.
-
Yes. When I use FOR i=0 TO 199
u = i/199
Point = EvaluateCurveAt(u)
ExportPoint(Point)
END FOR
It doesnt give anything on the console. I tried different export methods, I'm not able to get any output -
Hi All,
I have created a section geometry, and I need 200 equidistant points in the clockwise direction of my section, how can I export the same?
Export Equidistant points
in Miscellaneous
Posted · Report reply
Hi Heinrich,
Sorry for the confusion and adding something more.
I have generated my section with the origin at a different point than I intended. Instead, keeping everything else the same, the curves and everything, I need to only translate my coordinate system.
The next one is in the operation trim by curve, I only want a curve that is towards the left hand side. But depending on a design variable I have, the curvature is changing based on "curve to keep". Is there a way to only preserve the left side of the curve always.
Regards,
Stan