Mr. Birkner Bernhard
-
Content Count
8 -
Joined
-
Last visited
Posts posted by Mr. Birkner Bernhard
-
-
Thank your,
is it possible aswell to get schematic 2D drawings of my 3D propeller Model ?
cheers
Bernhard
-
Hey guys.
I have created a plot that shows skew, pitch and chord of my propeller.
Now I want to use this plot in a paper.
How can I get an .png or .eps file that shows me this graph or a 3D view of the propeller ?
Cheer,Bernhard
-
Hey Karsten,
Here is the edited tutorial project.
Again thanks for your help.
Cheers,
Bernhard
-
Hello Karsten,
Thank your for your help.
I have now been working with the OpenFOAM tutorial propeller, and followed the steps of the tutorial.
But when I run the software connector as said in chapter 8 of the tutorial, I cannot find a forces.dat file in my results.
In the File viewer it gives me following output:
Moving /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner/input/0.org to /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//0.org
Moving /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner/input/Allrun to /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun
Moving /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner/input/Allrun.pre to /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun.pre
Moving /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner/input/constant to /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//constant
Moving /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner/input/system to /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//system
[Captured output from application /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun]
/home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun: 6: /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun: wmUNSET: not found
/home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun: 7: /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun: source: not found
Running blockMesh on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner
Running surfaceFeatureExtract on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner
Running snappyHexMesh on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner
Running renumberMesh on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner
Running topoSet on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner
Running createPatch on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner
Running decomposePar on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner
Running pimpleDyMFoam in parallel on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner using 4 processes
Running reconstructPar on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner
how can the source not be found if we specify it in the Allrun script ?
-
Thanks for your awesome help.
Moving /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner/input/0.org to /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//0.org
Moving /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner/input/Allrun to /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun
Moving /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner/input/Allrun.pre to /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun.pre
Moving /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner/input/constant to /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//constant
Moving /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner/input/system to /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//system
[Captured output from application /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun]
hallo
/home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun: 8: /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun: wmUNSET: not found
/home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun: 10: /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun: source: not found
Running blockMesh on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner
Running surfaceFeatureExtract on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner
Running snappyHexMesh on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner
Running renumberMesh on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner
Running topoSet on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner
Running createPatch on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner
Running decomposePar on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner
Running pimpleDyMFoam in parallel on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner using 4 processes
Running reconstructPar on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner
This was the output given in the file viewer.
My project is attached below.
-
Thank you!
The tutorial is quite helpful. Yet I am already stuck. I have configured the Input Geometry and the Inputfiles.
But when i run it i cannot find the result Values where the are supposed to be.
-
Hey Guys,
im have created a propeller model in CAESES and now i want to simulate it with a software connector within CAESES. I have not much experience with connectors and was unable to find good information nor tutorials in the internet. Im am using both OpenFoam and Caeses on Ubuntu.
Can you please give me a litte tutorial on how to make this work?
thanks in advance.
Exporting Files form 3D view as pictures
in Miscellaneous
Posted · Report reply
Hey Claus,
thanks for your reply.
Whenever it tried to drag and drop, the console gave me an info that there are radii missing:
INFO |Propeller01 : can not draw sectional information [missing radii at blade]
what does it mean?
The Radii Series section in the blade configuration is left blank at my project.
Cheers Bernhard