Ms. Daphne Xin 0 Report post Posted October 30, 2019 Dear Mr/ Mrs First of all, I would like to ask professional " How to export selected STL file with meshing".Because i try to select export and choose the type to select and finally export a burst file which unable to read in another CFD software.Anyone know the solution for this problem and provide the guidance for me?Thanks for your convience and help. Sincerely,Daphne Share this post Link to post Share on other sites
Mr. Carsten Fuetterer 9 Report post Posted October 30, 2019 Hi Daphne, can you check the 2 videos "How to prepare a Brep for STL export" and "how to export a geometry": https://www.caeses.com/support/video-tutorials/ Let me know if that solves your problem cheersCarsten Share this post Link to post Share on other sites
Ms. Daphne Xin 0 Report post Posted November 1, 2019 Hi Carsten, First of all, thanks for replying me.I already follow the step which show in the video " How to export a geometry"when I choose the selected trimesh after optimised to export but the whole geometry before and after optimised export together and cause the geometry overlap and even burst already.In fact, I only want to export the selected part. Mr Carsten why this condition will happen? Sincerely,Ms Daphne Share this post Link to post Share on other sites
Mr. Carsten Fuetterer 9 Report post Posted November 4, 2019 Hi Daphne,can you send an example project. I don't exactly know what you mean. best regardsCarsten Share this post Link to post Share on other sites
Ms. Daphne Xin 0 Report post Posted November 4, 2019 okretroHULL_BuB_1v_1q.fdb Share this post Link to post Share on other sites