Mr. Christian Christian 0 Report post Posted August 24, 2018 Hello,I try to find out with the user manual as well as with the tutorial how can I show more then one Wave under the Plotviewer (XPAN Wave Profil)? Did anybody know how it works? At the attachment i put an example how i want to have it. Thx for helping. Kind regardsChris Share this post Link to post Share on other sites
Mr. Paulo Macedo 0 Report post Posted August 27, 2018 Hi Christian, In order to compare two wave profiles from XPAN computation do the following:1 - Select the first design that you want to show in the table of results, click on show results button (a computer symbol with an eye in the middle);2 - Go to the plot viewer and lock the design by clicking on the lock symbol upper left corner of the plot;3 - Go to the design you want to compare with, select and also show the results (should be already triggered);4 - Go back to the plot viewer and your two results should be there;5 - Edit the plot settings so that you can distinguish between the designs. Here is an example of two compared wave profiles: https://imgur.com/1rRPQ5ANote the red lock button in the upper left corner.Let us know if this solved your doubt. Cheers,Paulo Share this post Link to post Share on other sites
Mr. Christian Christian 0 Report post Posted September 1, 2018 Hey Paulo,thx for the explanation. Yes it works for two Wave Profils but if i want to compare more then two Waves?How is it work then? Kind Regards Chris Share this post Link to post Share on other sites
Mr. Paulo Macedo__0001 0 Report post Posted September 5, 2018 Chris, I am afraid it might not be possible. It might be necessary to write a feature that plots them all together based on multiple shipflow results.Maybe someone else knows another way for it. Cheers,Paulo Share this post Link to post Share on other sites