Mr. Daehwan Park 1 Report post Posted May 16, 2013 Suppose an optimization was done with SHIPFLOW and the offset data was also changed.Usually fairing and lines drawing follow in the next step.In these phase, several names of software break up in my head like Rhino3D, NAPA, AutoCAD, POLYCAD, ezHull and e.t.c. The wireframe created form offset data is converted to iges.All the second software could import reuse it, i.e. the designer does not need draw lines from the beginning but just manipulate. I hope this would be helpful enough to reduce the M/H practically among the office tasks. I am gonna close the first feasibility study.The insights of this task could be arranged like below :Stem part was not handled since my offset file does not have it.Offset data must be SHIPFLOW type.Wireframe is exported as IGES format.The quality of wireframe comes from that of offset data.The number of control points and wireframes must be able to manipulated in the next software.This product of this study is not so completed that I would not distribute the project file right now.When the positive signals are delivered and accumulated, I will reopen this issue and develop it for the better usage. // Daehwan.wireframe_kvlcc.zip Share this post Link to post Share on other sites