questions on exporting fully parametric model to rhino

[Ms. lexi wang__0001 0]

 Hi,

 

I am now trying to export a fully parametric model to rhino.

 

But i have got lots of NURBS surfaces . ( Since we are doing some comparison work for T-spline in rhino and NURBS in caeses )

 

1.How can I directly export the surfaces from caeses to rhino?

 

2.when I export the local parametric bulb from caeses with stl.file to rhino that is fine.

 

Is this about the fully parametric model ?

 

3.Recently when I open the files i have got some tips on the model like in figure. question , 

 

How can I repair them?

 

4.When I am trying  to get the shaft_cut_tan in the figure.question2. I cannot make the

 

start and end point for Y=0, that is why i cannot close the shaft totally. How can I repair this 

 

problem?

 

 

Thanks for your help!

 

Lexi.

[Ceyhan Erdem 14]

Hi Lexi,

 

Is it possible that you share the project file if it is not confidential?

You can send the fdb/fdbc file to erdem@friendship-systems.com, so I can give a look.

 

Cheers

Ceyhan

[Jörg 29]

1. Not sure what you mean. If you export the model using IGES or STEP, of course you will get all the surfaces that you have created within CAESES. Which export format did you use?

Not sure what you mean.

Is this a new behavior? For example, did it work with a previous CAESES version so that it is a compatibility issue?

[Ms. lexi wang__0001 0]

1 I have a fully parametric model, i wanna export igs.file with surfaces to RHINO

2 There is no problem for transporting stl.file to use in starccm

3  I think that is always there 

i will send the team erdem for a check .

Thank you for your help!

[Jörg 29]

Ok, cool.

 

What is the problem with the IGES file? Usually we have no problems with exporting models to RHINO using the IGES format.

 

I guess the other things are really something where one have to look into it.

[Ms. lexi wang__0001 0]

Hi Lexi,

 

Is it possible that you share the project file if it is not confidential?

You can send the fdb/fdbc file to erdem@friendship-systems.com, so I can give a look.

 

Cheers

Ceyhan

Hi

 

I have send you the file.

 

cheers,

Lexi.

[Ms. lexi wang__0001 0]

Ok, cool.

 

What is the problem with the IGES file? Usually we have no problems with exporting models to RHINO using the IGES format.

 

I guess the other things are really something where one have to look into it.

 

I have send Ceyhan the file just now. Thanks for your help!

Cheers,

Lexi.

[Ms. lexi wang__0001 0]

Thanks for all your help, my questions have been solved. :)

cheers,

lexi.

[Mr. Wolfgang John__0001 0]

I have problem too and solved. Thanks you