Ms. Yanxin Feng 1 Report post Posted January 30, 2018 Hi everyone, I encountered a problem when I created the trimesh for a containership (DTC).I already created the parametric ship hull and wanted to export the "stl" file.But the trimesh I created was not good ennough, there was a gap at the bow part of the ship hull, showed in the attachment. Is anyone can fix this problem or is anyone has parametric ship hull of DTC ( That would be the best)?Thanks a lot. With regards,Yanxindtc_Paramtric model_upload.fdbc Share this post Link to post Share on other sites
Mr. Claus Abt 14 Report post Posted February 12, 2018 You can throw them into a Brep and use a trimesh on top ot that, see attachment.CheersClausdtc_Paramtric model_upload_closed.fdbc Share this post Link to post Share on other sites
Ms. Yanxin Feng 1 Report post Posted February 14, 2018 Hi Claus, thanks for your reply. I checked the trimesh on top of Brep. But the quality of trimesh seems not very well, is there any way to improve the quality of this trimesh?Coz when I created trimesh directly on surfaces, I could edit the Tessellation of each surface one by one. In this way I could get better trimesh. Regards,Yanxin Share this post Link to post Share on other sites
Mr. Claus Abt 14 Report post Posted February 14, 2018 Hi Yanxin,Can you describe what kind of quality you would like to achieve, please? RegardsClaus Share this post Link to post Share on other sites
Ms. Yanxin Feng 1 Report post Posted February 14, 2018 Hi Yanxin,Can you describe what kind of quality you would like to achieve, please? RegardsClausHi Claus, I will explain it with those screen-shots in attachment.The first one is the goal trimesh I wanted to achieve. It looks clean and nice. And the second screenshot shows how I can edit the trimesh of each surface. The last screenshot is the one piece trimesh of Brep. I am not very sure whether it will effect the simulation phase when I combine GLRankine with CAESES. Regards,Yanxin Share this post Link to post Share on other sites