Mr. Claus Abt 14 Report post Posted April 27, 2013 Hi All,Please try out this parametric CAESES model of a volute for a blower. The basic shape is controlled by a function (red) to control the offset of the outer shape from the inner circle. If you switch off the visibility of the trimesh (named volute, click on its icon in the object tree) you can see the surface topology behind it. If you are a bit experienced, such a model is set up in 15 min from scratch. Have fun!volute1.fdb Share this post Link to post Share on other sites
Mr. Claus Abt 14 Report post Posted April 28, 2013 The outlet and the two inlet surfaces are oriented such that the normals point into the flow direction, all other normals point out of the flow domain.If you select the volute (trimesh) you can check out the different STL exports - which you will find in the menu: file | exports . Share this post Link to post Share on other sites