Karsten Wenzke 12 Report post Posted April 7, 2015 Hey folks, I have created an import feature for the numeca Autogrid file format .geomTurbo. This is the resulting import of an example geomTurbo file.(for the example file download this file GeomTurboImportFiles.zip) The Project file, which contains an imported example and the feature definition: GeomTurboImport.fdbIn the project file you can find the feature definition in the object tree in the feature definition section.simply click on the small arrow to expand this section. This is the import feature definition: GeomTurboImport.fdf To open the feature definition in CAESES:1) create a new feature definition: menu > Features > New Definition2) select Reload and browse to the folder which contains the already downloaded .fdf file3) click on Apply (lower right corner)4) Right click on the feature definition in the Object Tree and select Execute Definition5) set the path for your geomTurbo file for the argument File6) click execute7) if you cannot see the geometry in the 3dViewer click on the zoom extends button (lower left corner of the 3dViewer) or press F10 on you keyboard This thread might also be of interest if you want to write your own custom file import or export. If you need any assistance do not hesitate to propose your questions or problems. Cheers, Karsten Share this post Link to post Share on other sites
Jörg 29 Report post Posted April 19, 2016 Here is an article about the geomturbo export in CAESES. The export can be additionally customized by the user if required, i.e. the "code" is accessible as well (feature definition). Share this post Link to post Share on other sites