Exporting Files form 3D view as pictures

[Exporting Files form 3D view as pictures]

Hey Claus,

 

thanks for your reply.

Whenever it tried to drag and drop, the console gave me an info that there are radii missing:

 

INFO |Propeller01 : can not draw sectional information [missing radii at blade]

what does it mean?

The Radii Series section in the blade configuration is left blank at my project.

 

Cheers Bernhard

[Exporting Files form 3D view as pictures]

Thank your,

 

is it possible aswell to get schematic 2D drawings of my 3D propeller Model ?

 

cheers

 

Bernhard

[Exporting Files form 3D view as pictures]

Hey guys.

 

I have created a plot that shows skew, pitch and chord of my propeller.

Now I want to use this plot in a paper.

How can I get an .png or .eps file that shows me this graph or a 3D view of the propeller ?

Cheer,

 

Bernhard

[CAESES connected with OpenFoam]

Hey Karsten,

 

Here is the edited tutorial project.

Again thanks for your help.

 

Cheers,

 

Bernhard

openFoam_tut_prop.zip

[CAESES connected with OpenFoam]

Hello Karsten,

 

Thank your for your help.

I have now been working with the OpenFOAM tutorial propeller, and followed the steps of the tutorial.

But when I run the software connector as said in chapter 8 of the tutorial,  I cannot find a forces.dat file in my results.

 

In the File viewer it gives me following output:

 

 

Moving /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner/input/0.org to /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//0.org

Moving /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner/input/Allrun to /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun

Moving /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner/input/Allrun.pre to /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun.pre

Moving /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner/input/constant to /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//constant

Moving /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner/input/system to /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//system

 

[Captured output from application /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun]

 

/home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun: 6: /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun: wmUNSET: not found

/home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun: 7: /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner//Allrun: source: not found

Running blockMesh on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner

Running surfaceFeatureExtract on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner

Running snappyHexMesh on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner

Running renumberMesh on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner

Running topoSet on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner

Running createPatch on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner

Running decomposePar on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner

Running pimpleDyMFoam in parallel on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner using 4 processes

Running reconstructPar on /home/bernhard/Schreibtisch/CAESES/81_OpenFOAM_Propeller/manual_results/baseline/Runner

 

how can the source not be found if we specify it in the Allrun script ?

[CAESES connected with OpenFoam]

Thanks for your awesome help.

 

 

Moving /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner/input/0.org to /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//0.org

Moving /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner/input/Allrun to /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun

Moving /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner/input/Allrun.pre to /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun.pre

Moving /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner/input/constant to /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//constant

Moving /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner/input/system to /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//system

 

[Captured output from application /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun]

 

hallo

/home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun: 8: /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun: wmUNSET: not found

/home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun: 10: /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner//Allrun: source: not found

Running blockMesh on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner

Running surfaceFeatureExtract on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner

Running snappyHexMesh on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner

Running renumberMesh on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner

Running topoSet on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner

Running createPatch on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner

Running decomposePar on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner

Running pimpleDyMFoam in parallel on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner using 4 processes

Running reconstructPar on /home/bernhard/Schreibtisch/CAESES/sym_prop/manual_results/baseline/Runner

 

This was the output given in the file viewer.

My project is attached below.

 

sym_prop.zip

[CAESES connected with OpenFoam]

Thank you!

 

The tutorial is quite helpful. Yet I am already stuck. I have configured the Input Geometry and the Inputfiles.

But when i run it i cannot find the result Values where the are supposed to be.

[CAESES connected with OpenFoam]

Hey Guys,

 

im have created a propeller model in CAESES and now i want to simulate it with a software connector within CAESES. I have not much experience with connectors and was unable to find good information nor tutorials in the internet. Im am using both OpenFoam and Caeses on Ubuntu.

 

Can you please give me a litte tutorial on how to make this work?

thanks in advance.